LED lighting options come in a spectrum of hues known as colour temperatures. This correlates to how warm (yellowish) or cool (bluish) the light appears. The term for this is correlated color temperature (CCT), measured in Kelvin (K). CCT describes the shade of light similar to how we perceive sunlight’s changes throughout the day. For instance, midday sunlight might measure around 6000K, a bright bluish-white, whereas sunset light can dip below 3000K, casting a warm amber glow. For most residential uses, LED lights typically range between 2500K and 5000K on the Kelvin scale.

Orbit

ORBIT is a 2″ or 4″ adjustable downlight that allows for easy directionality to precisely aim light in almost any direction. With 80-degree tilting and 360-degree rotation this fixture is perfect for creating a seamless look throughout your space. Perfect for sloped ceilings with a steep roof pitch, this fixture can adjust to shine straight down.

LED Driver: Extruded aluminum hardwire box with 210mA dimmable class II electronic LED driver with 100-135V, 60Hz AC input. Includes an 15″ FT6 rated cable with 3-pin DC connector between driver and fixture approved for use in plenums and suspended ceilings. Includes 5 position CCT switch.

Dimming: 100%-10% dimming capability. This fixture is compatible with industry standard TRIAC/ELV dimmers. 

Environment: Suitable for wet locations. Approved for direct contact with insulation. Airtight Indoor / Outdoor rated.

Inquire

LUNA

A premium integrated LED luminaire and a budget retrofit, the LUNA Series offers the housing, trim, and lamp look without the overhead and heat! Available in round, square, tilting and fixed options, LUNA offers space uniformity to best suit your building’s or project’s needs.

LED Characteristics: This general application light fixture features a 12 watt LED module that maintains uniform intensity producing up to 885 lumens; with a typical CRI of 90. Available in 2700 K, 3000 K, 3500 K , 4000 K or 5000 K color temperature.

Mounting: Includes two spring loaded clips to attached to any ceiling material.

Shop Luna

SKYE & SKYE Select Trim

The SKYE fixture by Liteline is a high-performance, easy to install downlight, with regressed optics to reduce glare and interchangeable magnetic baffles. Upgrade the look with SKYE Select Trims for a more elegant finish, in round or square, or with different interior baffle colors. Available in a CCT selectable model or OnCloud offering full color and white tuning.

Body: Durable airtight aluminum body with UV stable paint and white PMMA diffuser lens for low glare. Includes silicone gasket for wet location applications. Includes White interchangeable magnetic trim.

Mounting: Includes two spring loaded clips to attached to any ceiling material.

Shop Skye

Whether your project calls for a straightforward retrofit or a sophisticated lighting solution for new construction, Liteline offers versatile options to meet your needs. Explore our range of products online or contact us for personalized advice!

The post Liteline Recessed Downlights & Colour Selection appeared first on E.B. Horsman & Son.

Here are some of the basics to help keep your assets safe from power surges.

Stay Safe with Surge Protection Devices

Surge Protection Devices (SPDs) are electrical components used for voltage protection in power supply circuits and electrical distribution networks. When there’s an unusual increase in voltage, surge protectors redirect electricity away from your devices, preventing equipment damage and lost production time.

Using a Mersen SPD on your electrical distribution panel ensures a high degree of surge protection. Features include:

• LED protection indicator
• Easy installation and minimal investment
• Thermally protected components ensure surge protection
• Surge protection for Lighting (LED installation)

How Surge Bars Help

Surge bars are essential for protecting your electronic equipment. The Leviton 5500-190 provides point-of-use surge suppression. It features six protected duplex receptacles, an easy-access on/off switch, and a resettable circuit breaker to protect against overloading and power supply failure. To avoid unnecessary equipment switching, you can opt for one without a switch. 

Commercial Surge Prevention Tips

While you can’t stop storms and power grid failures, you can take these steps to prevent power surges and damage in your commercial space:

• Get a licensed electrician to install a main service panel suppressor, and make sure it’s inspected regularly. 
• If possible, unplug all electrical devices during storms.
• Use and understand commercial or industrial-grade surge protectors.
• Hire a licensed electrician to do regular wiring inspections.
• Use energy-efficient equipment to reduce electricity consumption.
• Make sure you have equipment breakdown insurance, just in case you need it.

Industrial Surge Protection Tips

Surge protection is a key priority for your industrial facility, too. You can achieve this with:

• Automation and control help you manage systems and prevent damage to your critical components
• Heavy equipment and instrumentation suppress excess voltage
• Motion controls block or short voltage over operating limits 
• LED lights cut back on energy use (but have sensitive electronic parts vulnerable to power surges)
• Programmable logic controls act as the brains of your control panel
• Protecting your facility’s main circuit breaker and equipment both indoors and outdoors in advance can help you prepare for unexpected surges
• Comprehensive low-resistance grounding resistor systems protect power transformers and generators from damaging fault currents
• Data line and power protection keeps your electronic equipment connected during a crisis

Get In Touch

Whether you’re looking for support for your commercial or industrial project, our team of experts can help keep your assets safe. Get in touch for support today!

The post How to Prevent Industrial and Commercial Power Surges appeared first on E.B. Horsman & Son.

SIMATIC HMI Unified Comfort Panels: Next-Generation Touchscreen Solutions

The SIMATIC HMI Unified Comfort Panels are designed to provide a seamless and intuitive user experience. Featuring a modern interface similar to smartphones, these panels offer a robust, hardened glass front that supports glove operation. Their anti-reflective, high-brilliance glass ensures excellent readability, while advanced fault detection technology identifies accidental touches, such as the heel of a hand. With high electromagnetic compatibility (EMC), these panels are built to perform reliably in diverse industrial environments.

Key Features

• Multitouch Screens: Available in sizes ranging from 7″ to 22″ for versatile user interaction.
• Authentication: Use the SIMATIC Unified Air app (iOS and Android) for secure access to SIMATIC HMI Unified Comfort Panels via your mobile device’s fingerprint or face recognition sensor.
• Connectivity: Full connectivity with both Ethernet interfaces—Profinet and Ethernet.
• Preinstalled Applications: Panels come with preinstalled, ready-to-use applications.
• Protection Accessories: Includes adapters and frames designed for migrating from Comfort Panels to Unified Comfort Panels, ensuring a smooth transition and continued protection.

FLO CoRe+ Series: Advanced EV Chargers for Efficient Charging Solutions

The FLO CoRe+ Series offers versatile, reliable fast charging for various settings, including workplaces, multi-residential units, and fleets. Its convenient cable management features include twisted steel cables and a counterweight system to prevent tripping hazards and ensure smooth retraction.

The multi-function CoRe+ pedestals double as junction boxes, reducing the need for additional installations on a single branch circuit. Supported by FLO’s North American manufacturing, you benefit from comprehensive after-sale support, including 24/7 driver assistance and quick access to spare parts. With one of the industry’s most extensive warranties, proactive monitoring, automatic updates, and customizable access controls, the CoRe+ Series ensures optimal performance and reliability.

CoRe+^TM

Electrical load 208 VAC or 240 VAC for each charging station

Charging Power 1.2 – 7.2 kW (maximum configurable by software)

Output Current 6 A to 30 A

Shop Now

CoRe+ MAX^TM

Input Rating 208 VAC or 240 VAC for each charging station

Max Output Power 1.2 kW to 19.2 kW 0.5 to 125 ADC

Max Output Current 6A to 80A

Inquire

Cut Your BC Hydro Bill by Charging Your EV During Off-Peak Hours

Looking to manage your home electricity consumption as an EV owner? Consider BC Hydro’s tiered rate with time-of-day pricing.

By opting in:

• You’ll enjoy a 5-cent discount per kilowatt-hour (kWh) for electricity used between 11 p.m. and 7 a.m.
• A 5-cent surcharge per kWh will apply for usage between 4 p.m. and 9 p.m.

This plan is ideal for EV owners who can charge their vehicles at home overnight. With a few adjustments to your routine, switching to this plan can help you save money while also easing demand on the electrical grid during peak hour.

ABB Microlectric Meter Sockets: BC Hydro Approved and Code Compliant

The ABB Microlectric meter bases are proudly designed and manufactured in Canada. These meter bases are built to meet Canadian code requirements and are CSA-certified for overhead, underground, or combined services, accommodating both copper and aluminum conductors.

The ABB Microlectric® all-in-one 400 and Microlectric® CT-L Series meter socket is designed to meet the latest requirements for single-family residential services. These meter sockets are built to meet Canadian code requirements and are CSA-certified for overhead, underground, or combined services, accommodating both copper and aluminum conductors. They comply with BC Hydro’s instrument transformer enclosure standards for services approved after March 1, 2013.

Microlectric® all-in-one 400

• Load Side Terminations: Tunnel type connectors, dual-rated for 1 x 500 kcmil or 2 x 250 kcmil
• Dimensions: 30-5/8 in. H x 20-1/4 in. W x 8-3/8 in. D; made of heavy gauge galvanized steel with an oven-cured grey enamel finish. Weight: 72 lb. (32.7 kg)
• Knockouts: Three bottom knockouts for 1-1/4 in., 1-1/2 in., 2 in., 2-1/2 in., 3 in., 3-1/2 in., and 4 in. conduit
• Enclosure: Weatherproof Type 3R
• Metering: 400/5 A, 5 Jaw; provisions for test switches (test switches supplied by BC Hydro) and current transformer (transformer supplied by BC Hydro)
• Secondary Circuit Wiring: Not included (to be wired by BC Hydro)

Shop Now

Microlectric® CT-L Series

• Transformer-Rated: 20 A, 600 V maximum
• Conductor Range: 14-10 AWG
• Connectors: Tunnel type connectors for both load and line sides
• Service Type: For underground service only
• Meter Compartment Cover: Overlaps the lower test switch compartment cover, with the meter securely holding the upper cover in place via a catch and an additional piece for extra security
• Protection: A cover conceals the hydro seal from view
• Test Switch Compartment: The lower test switch compartment cover is securely held by the upper cover and can be locked to restrict access

Shop Now

Cooper WaveLinx: The Future of Connected Lighting Systems

The Cooper WaveLinx connected lighting system is an innovative, scalable, and integrated system that encompasses sensors, keypads, and luminaires, providing flexibility and compatibility for various needs. WaveLinx is energy-efficient and complies with the ASHRAE 90.1 building code, making it ideal for commercial environments such as universities, hospitals, and offices. With WaveLinx, you can manage lighting across multiple floors, buildings, or even entire campuses directly from your mobile device. The system supports both wired and wireless connectivity, offering solutions for indoor, outdoor, commercial, and industrial applications. WaveLinx also integrates with smart building platforms via BACnet/IP and Public API (REST), sharing valuable insights on space and asset usage to optimize building performance and efficiency.

WaveLinx Wireless enables seamless connectivity across various sites, while WaveLinx Wired supports complex features and controls through a two-wire local bus. Both systems are complemented by a comprehensive range of voltage luminaires, sensors, control devices, wall stations, and accessories, ensuring optimal customization. By integrating these components and leveraging advanced data features, WaveLinx not only enhances operational efficiency but also meets comfort requirements and regulatory standards, showcasing how advanced lighting technology is reshaping building management.

The post Inventors Month: EB Horsman Highlights New Electrical Innovations Shaping the Future appeared first on E.B. Horsman & Son.

What’s Considered a ‘Hazardous Location’ in the Electrical Industry?

A hazardous location is an area that has the potential for fire or explosion, whether due to the presence of flammable gases, vapours, dust, or fibres, and where special precautions and equipment are necessary.

Examples of hazardous locations include grain elevators and mills, oil refineries, mines, textile mills, and chemical manufacturing facilities.

Hazardous Location Classifications at a Glance

The Canadian Electrical Code (CEC) outlines specific categories to help identify and manage these risks, known as Class, Zone, and Division. Each one is defined by the type of hazardous material present and risk level. 

But there are further specifications based on location and industry. For example, in locations with risk of fire, the National Fire Code of Canada addresses fire safety in buildings, including for electrical installations in hazardous locations. 

As well, each province can adopt and modify the CEC to suit local requirements, such as under the Alberta Electrical Utility Code. Be sure to know which codes apply in your area.

What Do the Different Hazardous Location Classes Mean?

Hazardous locations are categorized into three main classes—each defined by the type of hazardous material present and associated risks.

Class I: Gases, Vapours, and Liquids 

This category includes places where flammable gases, vapours, or liquids are present, with a risk of creating explosive atmospheres when mixed with air. Examples are petroleum refineries, chemical plants, and gasoline storage areas. 

Class 1 locations can be subdivided into zones (Zone 0, Zone 1, or Zone 2) or divisions (Division 1 and Division 2), depending on specific circumstances and risks.

Class II: Dusts 

These are areas where combustible dust could accumulate and create explosive atmospheres. Industries such as grain handling, sugar production, and woodworking often have Class II hazardous locations. Class II locations typically use divisions (Division 1 and Division 2).

Class III: Fibres and Flyings 

These include spaces where ignitable fibres, or flyings, are present—such as textile mills, wood shops, and paper mills. While fibres are not typically in the air, they can accumulate around machinery or equipment. Class III locations also use divisions (Division 1 and Division 2).

What’s the Difference Between Zone and Division?

Hazardous locations in Canada are sub-divided into zones or divisions, as outlined in the CEC. These sub-categories provide more specific information about the risk and conditions of a particular hazardous location. 

Zones

Used mainly for Class I locations,the zone classification system is based on the frequency and duration of explosive gases or vapours. You’ll need to apply this more recent and internationally harmonized system for all new construction. This system is also especially useful for complex environments where detailed risk assessment is necessary.  

Divisions

Divisions are used in Class I, II, and III locations. A broader classification system, divisions are often used in less complex environments. This older method is still applied and may be used during maintenance or repair work in your building. 

Below is a table outlining how classifications interact with zones and divisions depending on potential hazards and location examples.

Note: you can’t mix zones and divisions within a single class location—they are separate systems for defining risks within classes.

Special Considerations: Mills, Mines, and Marine Environments

Some common industry environments here in Canada are mills, mines, and marine locations. But how do you typically classify these? 

In addition to Class I and Class II, the CEC includes zones for areas where combustible dust or fibres are present. These are commonly applicable to mills, mines, and marine environments. 

Mills, Mines, and Marine Environments

Mills 

Grain-handling areas might be classified under Zone 20, which is where combustible dust or fibres are present continuously or for long periods, making them high-risk areas. Explosive dust atmosphere in the air in occasional clouds—or Class II, Division 2—hazardous dust clouds may occur during abnormal operation—due to the presence of combustible grain dust. 

Similar to grain-handling areas, flour mills may also fall under Zone 20 or Class II, Division 2 due to the risk of flour-dust explosions. 

Be mindful that different zones or divisions often exist at the same location. For example, a flour mill might be classified Zone 20 for its flour-handling area, while its office area is a safe zone. 

Mines 

Depending on the presence of methane gas or coal dust, underground tunnels could be classified as Zone 0 or Zone 1—explosive gas atmosphere present continuously or occasionally. 

They could also fall under Class I, Division 1 or Class II, Division 1—hazardous atmosphere or dust cloud present continuously or periodically.

Marine Environments 

Knowing about hazardous locations is also important for marine transportation, a common hazardous location on the coasts of Canada. 

Engine rooms and fuel-storage areas are likely to be classified as Zone 0—continuous explosive gas atmosphere. They could also be under Class I, Division 1—hazardous atmosphere present continuously—due to vapours from gasoline, diesel, or other flammable liquids.

Ensuring Safety in Hazardous Locations

To prevent accidents, injuries, and potential disasters, there are some key safety precautions to follow.

Conduct Risk Assessments 

To better understand your specific location, conduct a thorough risk assessment to identify hazards and accurately classify your area. Only use equipment that’s properly rated equipment as classified. 

Educate Staff

Ensure that your staff is well-trained and educated on both hazards and necessary safety protocols. Regulations change often, so follow industry experts or contact experienced professionals to educate staff with accurate information.

Establish Regular Maintenance Practices

Regular maintenance and equipment inspections will help you maintain safety standards and ensure all systems function correctly. 

Ensure that ventilation systems are operating smoothly to keep locations well-ventilated and disperse hazardous gases, vapours, and dust accordingly.

Keep Areas Well-Lit

Proper lighting is crucial. But make sure to use lighting brands and products that are designed specifically for hazardous locations, such as ABB’s Hazlux® line. This high-quality, industrial line is known for specializing in enhancing visibility and reducing risk in hazardous locations in harsh conditions.

Work With Experts

Rely on advice from industry professionals, and always source quality products from renowned suppliers and trusted distributors. 

Stay Up-To-Date 

Getting to know these categories will help you ensure proper safety measures and compliance when flammable gases, vapours, dust, or fibres are present at a work site. 

For more detailed information, refer to the latest edition of the CEC. And be sure to consult with qualified electricians to determine the appropriate classification for your environment.

The post Class, Zone, and Division: Explaining Hazardous Location Ratings appeared first on E.B. Horsman & Son.

But it’s tough to find the right one you need. Let’s look into different pin and sleeve options to find the right option for your project. 

But First: What Are Pins and Sleeves?

Also called industrial connectors or plugs and receptacles, pins and sleeves are robust, weather-resistant electrical devices. They securely seal your power connections in harsh environments by interlocking a male pin (plug) and female sleeve (receptacle). 

How Do Pin and Sleeves—or Plugs and Receptacles—Work?

The interlocking design—thanks to the ground plug—keeps the connection stable, especially in areas with bumps or vibrations. 

The protective sleeve, or receptacle, shields the connection from dust and moisture, making these ideal for industrial and manufacturing environments, construction sites, and anywhere else that a reliable and secure electrical connection is necessary.

While pins and sleeves might all look similar, they each serve a specific purpose for a particular setting. Let’s look at different plugs and receptacles from top brands: Crouse-Hinds, Wiedmüller, Leviton, and Meltric.

Differences Between Leviton, Wiedmüller, Meltric, and Crouse-Hinds Plugs and Receptacles

As you can see, the pin and sleeve from each company is for different purposes.

Leviton LEV Series: 

• Ideal for commercial and light industrial application settings
• Voltage: up to 600V, 20-60A
• Compact & user-friendly design, easy to install
• Best for quick installations

Wiedmüller Rockstar HDC Connectors :

• Offers a series of compact, quick disconnect heavy duty industrial rectangular connectors
• Voltage: up to 690V, 16-125A 
• Corrosion resistance: IP65 and Nema 4X
• Durable and easy to assemble

Meltric:

• Industrial and commercial; the harshest environments
• Voltage: up to 600V, 20-200A
• Exclusive Switch-Rated Safety, durable
• Safe and quick to disconnect under loads, with contact mating sequence

Crouse-Hinds Arktite: 

• Industrial, hazardous environments; ideal for heavy-duty applications
• Voltage: up to 600V, 30-100A
• Explosion-proof, durable
• Meets stringent safety standards for harsh environments 

How to Know Which Plug and Receptacle to Use

To determine which one you need, start by identifying the voltage and current requirements of your project. You want to ensure the connectors are compatible with your equipment and can handle the electrical load. 

Then, consider exposure to water, dust, or extreme temperatures. To withstand harsh environments, look for connectors made of weather-resistant materials, such as heavy-duty plastic or metal.

Make sure they have proper certifications, such as IP ratings for dust and water protection, or IEC or UL ratings to ensure compliance and safety, and ergonomic design for easy handling and installation.

Are Connectors Interchangeable?

Industrial connectors are not generally interchangeable due to different designs, voltage and current ratings, and safety standards. 

They’re designed for specific uses, and have unique pin configurations and mechanical keying to prevent mismating. Additionally, manufacturers may also have proprietary designs that aren’t compatible with other brands. 

Still Not Sure Which Pin and Sleeve You Need?

Choosing the right plug and receptacle for your electrical project is essential. If you have any questions or need further assistance, reach out to our team of experts. We’re here to help you make the best choice!

The post Which Pin and Sleeve To Use: A Comparison of Connectors, Plugs, and Receptacles  appeared first on E.B. Horsman & Son.