Customer Service
SSFR heating cable increases or decreases the heat output in a self-regulating way depending on changes in the ambient temperature, so a thermostat may not be necessary in some applications. It will never overheat or burn out even when overlapped. This heating cable reel is available with optional termination, power connection, splice and tee kits to reduce installation time and require no special tools.
Energy Efficient: Automatically vaires its power output in response to temperature changes
Easy to Install: Can be cut to any length (up to maximum curcuit length) required on site with no wasted cable
SAFE: Even when overlapped
Power Connection, Splice, Tee & End Seal Kit: Reduces Installation time
IDEAL FOR: pipes at risk of freezing and roofs and gutters with ice damming problems
This preassembled heating cable is designed to prevent ice damming on roofs and gutters, which could be harmful to the roof and dangerous for passers-by.* The roof and gutter de-icing cable creates a path that allows water to flow normally through the gutters. It’s easy to install on any type of inclined roof. It can also be installed in metal or plastic gutters.
* Never install on a flat roof. This cable is not designed to remove all the snow from a roof.
i) Prevent Roof Damage & Leaking
ii) Keep Gutters & Downspouts Flowing
iii) Preassembled Ready to Install
iv) Thermostat With Temperature & Moisture Sensors (Optional)
IDEAL FOR: roofs and gutters with ice damming problems
This preassembled heating cable is designed to prevent pipes from freezing and avoid water damage. The cable is easy to install thanks to its 120 V plug, and the integrated thermostat triggers heat only when necessary. The cable is installed on pipes under insulation and protects against freezing down to -40 °C (-40 °F). Ideal for metal or plastic pipes up to 1.5 in. (3.81 cm) in diameter.*
* The cable must never cross over itself. Plastic pipes must always be filled with water.
i) Prevents Pipe Breakage & Water Damage
ii) Ideal for Plastic or Metal Pipes
iii) Lighted Plug Power Indicator
iv) Integrated Themostat that Triggers at 3 °C (37 °F) to Prevent Freezing
IDEAL FOR: pipes at risk of freezing
This heating cable protects pipes, roofs and gutter systems from damage due to freezing and can be used in residential and light commercial applications. The self-regulating freeze protection cable automatically adjusts its heat output according to the ambient temperature conditions. Under cooler conditions, the heat output increases, and as the temperature rises, the output decreases to save on energy. This product comes preassembled in various lengths and is available in 120 V and 240 V.
i) Self-Regulating Preassembled Cable
ii) For Residential & Commerical Applications
iii) 240 V Models Available With Three-Wire Pigtail
iv) Wide Variety of Lengths
IDEAL FOR: pipes at risk of freezing and roofs and gutters with ice damming problems
Customer Service
1.888.467.7626